Ceci est une ancienne révision du document !
Warning: "continue" targeting switch is equivalent to "break". Did you mean to use "continue 2"? in /home/tsfigilq/www/wiki/inc/parser/handler.php on line 1552
. Amtico floor covering is almost one of the most hardwearing as well as sensible alternative to actual wood.
There is a huge selection available in the most up to date natural wood layouts. These array from the softest grains such as white maple, to the mid toned timeless oaks, and on to the darkest colour in the array called Wenge Wood.
All Amtico woods are authentic British made business quality (not the Asian made Spacia or Karndean) as well as are available in 'tick' coating in the optimum 114mm x 915mm standard size.
Selecting an Amtico flooring means you will not need to fret about long term maintenance- your flooring will never need fining sand or re-finishing. The hard hardwearing surface will ward off discolorations and also wetness making it an excellent choice for wet locations such as restrooms and bathroom, as well as hefty wear areas even hallways as well as entrance lobbies, Learn More Here.
Amtico wood authentically replicates the natural product and it's true characteristics. The Stripwood is highly variable in grain and also decoration. Please consider this in your product selection as online photos only show a tiny section of the material.
Setting up Amtico wood flooring could be carried out by any fairly qualified DIYer with little in the way of tools. If you are laying into an existing wood floorboard, chipboard, or MDF sub-floor, it is always good technique to set up a new plywood base initially. Not only will this ensures long term wear, it will certainly likewise avoid wavinesses showing through your brand-new flooring.
If your sub-floor is sensibly flat, 6mm outside grade dampness resistant plywood suffices. This should be dealt with at 15-20cm facilities with screw nails. If your sub-floor is old and very uneven, a much heavier quality plywood 9mm or 12mm ought to be utilized. Nonetheless before mounting this, level off any kind of hollows with a latex screed compound. Otherwise the plywood will never be completely level.
After fixing down the plywood, spend as much time as possible filling up any type of voids in the joints, and also tearing down nails flat. After that remove any high spots with a tool quality sand paper. A lot more Time handled preparing the sub-floor will produce substantial dividends when you have installed you new Amtico, so do not be attracted to reduce any kind of edges.
Depending upon exactly how level and smooth you have actually handled to make the plywood base, it might be required to use a further leveler such as Ardex “Feather Complete” which could be applied very finely without the risk of de-bonding
When you are installing over a strong flooring e.g. concrete, asphalt, quarry tiles, rock flags and so on it is imperative that your do a thorough check of the wetness material of the sub-floor. Also a percentage of dampness in a sub-floor will certainly trigger Amtico floor covering to begin raising within an extremely brief time period. Your investment will certainly then be wasted, as the floor will certainly be beyond repair.
Check initially for the presence of a dpm, which must show up on your outside, wall surfaces perhaps the first or 2nd line of block or rock. If there is none obvious, and your house was constructed before 1960, after that it is smart to assume that there is no moist proof membrane layer in the sub-floor.
Your only option after that is to use a surface area dpm to the sub-floor. These are a 2-part epoxy material finish. These are simple to apply, yet could occupy to 2 Days to treat. The most widely used item is ES3000 made by Treetabond.
As soon as you have a dry tidy solid sub-floor, a leveling screed must be applied Always adhere to the screed suppliers instructions with regard to using priming or bonding representatives. Keep in mind that if the screed de-bonds from the sub-floor, your brand-new Amtico floor will additionally fall short.
The screed must be massaged down as smooth as feasible prior to installing your Amtico flooring. Noticeable trowel marks, high or reduced spots will certainly quickly come to be obvious as soon as you have a new shiny floor fitted over the screed. For that reason more time and effort invested in the prep work will be compensated with a superior last floor surface, Clicking Here.
The Amtico flooring should always be mounted utilizing the approved Amtico adhesive. For damp areas the Amtico 'Universal' glue must constantly be used. Amtico flooring can be laid into underfloor home heating, provided that Amtico HT (high temperature) adhesive is utilized. For all various other areas, the common Amtico SF (solvent free) adhesive can be made use of without issues.
Since withany, Amtico floor covering will gain from routine maintenance. The Amtico floor dressing will provide improved defense fromwet as well as abrasion. The Amtico Cleanser will efficiently cleanse your flooring without eliminating the Dressing. Nonetheless, when the moment involves restore the clothing,
